top of page
Electrical Maintenance & Testing
HV and LT maintenance, diagnostics, testing and breakdown response for transformers, substations, switchgear and RMUs.
Which transformer tests a plant should order every year, and which ones only after a fault
The yearly transformer test set, the tests that need a fault or a baseline, why a good oil BDV proves little on an old unit, and what a useful test report shows.
gradeelectricalswe
Oct 307 min read
Â
Â
Â
What the CEA safety regulations 2023 ask of a factory with its own HT installation
Safety officer above 250 kW, approval before energising, inspection at the interval your state sets, and the test table the inspector's own form asks for.
gradeelectricalswe
Oct 308 min read
Â
Â
Â
Power Factor Penalty in Maharashtra: What kVAh Billing Replaced It With
MSEDCL withdrew power factor incentives and penalties for consumers on kVAh billing. What replaced them costs more at poor power factor, and the tariff was set assuming 0.95.
gradeelectricalswe
Sep 287 min read
Â
Â
Â


Transformer Oil BDV Test: Acceptable Values by Voltage Class
Minimum and target BDV values for 11 kV to 220 kV transformer oil, the IS 6792 test method, moisture limits, and what to do when a reading fails.
gradeelectricalswe
Sep 66 min read
Â
Â
Â
bottom of page
